TPU Extruded-Through-The-Weave Manufacturer

Mammoth’s TPU high pressure through-the-weave-extrusion lay flat hoses are constructed with high tenacity fibers and an extremely abrasion resistant thermoplastic polyurethane (TPU).  Our Mammoth TPU lay flat hoses are quickly becoming one of the most cost effective investments for water transfer in the oil and gas industry.


about-1

Mammoth Manufacturing, Inc. (MMI) is the North American distributor for Grand Alliance Industrial, Ltd. (GAI), one of only three or four companies in the world that manufactures 12-inch lay flat hose.  GAI also manufactures the loom machines used throughout the industry to weave lay flat hose. Lay  flat hose is produced in several sizes and compositions for various...  Learn More

about-2

Mammoth’s TPU high pressure through-the-weave-extrusion lay flat hoses are constructed with high tenacity fibers and an extremely abrasion resistant thermoplastic polyurethane (TPU).  Our Mammoth TPU lay flat hoses are quickly becoming one of the most cost effective investments for water transfer in the oil and gas industry.  Learn More


QUALITY AND SERVICE AND GURANTEED

Manufacturing quality assurance and control is maintained in the factory by an engineering staff with a combined experience of over 75 years in production and product management. Each 660 foot length of hose we produce carries a unique serial number and date of manufacture. Serial numbers will be maintained in a permanent data bank together with a record of all factory conditions on that date that are pertinent to the manufacturing process.

To the right, you'll see an actual video of Mammoth Lay Flat hose being tested. This is a video of one of our 660' TPU pieces being tested with our custom couplings attached. The entire section of hose will be tested at max working pressure.

From AQL Level III testing to shipping with couplings attached, Mammoth Lay Flat Hose is ready for immediate field use.

A Closer Look : 12” TPU vs 10” Rubber

Thermoplastic Polyurethane (TPU) is one of the highest abrasion resistant materials available on the market today, much more so than NitrileRubber/PVC. This is what makes our 12” TPU lay flat hoses up to 5 times more durable than standard 10” NitrileRubber/PVC hoses.

Durability is not the only factor between the two, 12” hoses have a 44% increase in transfer capacity when compared to 10” hoses. With an increase in volume of this proportion, a 12“ hose has the capacity to outproduce a 10” hose by almost 2 weeks over the course of a month.

The large increases in transfer capacity, TPU’s much longer service-life, and the abrasive superiority and over all toughness are contributing factors in Mammoth’s 12” TPU lay flat hoses quickly becoming one of the most cost effective investment for water transfer in the oil and gas industry.